本文へ移動

ASO High Clean Permanently Antistatic Bag in Standard Sizes(patent pending)

"ASO High Clean Permanently Antistatic Bag in Standard Sizes" is a completely new "permanently antistatic plastic bag" (patent pending) that does not incorporate surfactants (organic substances) or any metals. This product is highly clean and safe for use in a cleanroom, for example in semiconductor applications.
 
//www.po-aso.co.jp/en/files/libs/158/201804052338106827.PNG //www.po-aso.co.jp/en/files/libs/160/201804052338114067.PNG
Major features
Clean
Highly clean
Standard size
Sterilized
Antistatic
UV protection
 Request a quote
Contact us

Overview

"ASO High Clean Permanently Antistatic Bag in Standard Sizes" is a completely new permanently antistatic plastic bag (patent pending) that does not incorporate surfactants (organic substances) or metals at all. This product is highly clean and safe for use in a cleanroom, for example, in semiconductor applications.
This product is also appropriate for use in the pharmaceutical applications and it has been certified to comply with the "Test Methods for Plastic Containers" in the Japanese Pharmacopoeia, 15th edition.
 

Features

  1. This product has highly clean inner and outer surfaces and is permanent antistatic available in standard sizes.
  2. No additives bleed out onto the film surface.
  3. Conventional processing techniques that may cause bleed-out or shedding of ingredients, such as the incorporation of organic antistatic agents, carbon, heavy metals, or light metals, or the application of coatings are not used. A new fabrication method (patent pending) is used to make this product.
  4. This product is an antistatic bag with excellent seal strength.
  5. These bags have permanent antistatic properties and can be used without having to worry about static electricity.
    This product is available in standard sizes. It is available in small lot sizes and small packs for immediate delivery.

Anti-static performance

ASO High Clean Permanently

Antistatic Bag in Standard Sizes

Inner surface
Outer surface
Specimen 1
1.80×1010
3.46×1010
Specimen 2
2.04×1010
3.77×1010
Specimen 3
1.99×1010
3.93×1010
Specimen 4
2.44×1010
4.56×1010
Specimen 5
2.37×1010
4.34×1010
Average
2.13×1010
4.02×1010
※[Measurement method] JIS K-6911
※The table shows measured,not guaranteed,value.
 

Standards compliance

Test items

ASO High Clean Permanently

Antistatic Bag 

Raw material
Food Sanitation Act (Japan)
Standards and criteria for
food and food additives, etc.
Product
Japanese Pharmacopoeia
Polyethelene or poypropylene containers for aqueous
injections.
21CFR(FDA)
§177.1520 (C)2.2
※Some of the above test contents are excerpted and tested.
[Micron particle data]                                                                                   

Inner surface cleanliness data

ASO High Cean Permanently Antistatic Bag
CT-3 (0.1mm×250mm×350mm)
Particle size
2μm
3μm
5μm
10μm
25μm 
40μm
Measured value
1
0
0
0
0
0
2
2
1
1
0
0
2
1
1
1
0
0
Maximum
2
2
1
1
0
0
Average
1
1
1
1
0
0
Minimum
1
0
0
0
0
0
ASO High Clean Poly Bag
Size 3A (0.1mm×250mm×350mm)
Particle size
2μm
3μm
5μm
10μm
25μm
40μm
Measured value
2
1
0
0
0
0
4
2
1
0
0
0
3
2
1
0
0
0
Maximum
4
2
1
0
0
0
Average
3
2
1
0
0
0
Minimum
2
1
0
0
0
0
※The above figures are not guaranteed values but measured values.
 
Measurement method
The bags were filled with 500 mL of dust-free water with a blank count close to zero and then the bag was tied at the top.Then, 10 mL of the water was taken out of the bag and the number of particles in this sample was counted.This measurement was repeated three times and the average value calculated. The total particle numbers are shown in the tables above.

Film properties

Test items
ASO High Clean Permanently Antistatic Bag Ct-3
0.1mmx250mmx300mm
ASO High Clean Poly Bag size 3A
0.1mmx250mmx300mm
Measurement method
Tensile strength
(N/mm2)
MD
38.5
26.0
JIS Z-1702
TD
31.4
28.8
Tensile elongation
(%)
MD
655
365
JIS Z-1702
TD
645
490
Seal strength (N/10 mm)
24.32
16.23
Our measurement method
Oxygen permeability
 [ml/(m2·24h·Mpa)]
16118
20204
JIS K-7126-1
Water vapor permeability
[g/(m2·24h)]
6.71
5.56
JIS K-7129

Size/Specifications

These bags are available in standard sizes that are commonly used for packaging in the pharmaceutical, semiconductor, and electronic device applications. We deliver this product by the case. This product is also available in custom sizes. For details, contact our sales representative.
Size No.
Thickness x width x length (mm)
Quantity
(No. of bags per plastic packaging bag x No. of bundles)
CT-1
0.1×150×250
250 bags per case
(50 bags x 5 bundles)
CT-3
0.1×250×300
250 bags per case
(50 bags x 5 bundles)
CT-5
0.1×350×400
100 bags per case
(25 bags x 4 bundles)
CT-7
0.1×450×600
100 bags per case
(25 bags x 4 bundles)
CT-L
0.1×600×850
80 bags per case
(20 bags x 4 bundles)

This product is also available in custom sizes.

We produce this product to suit your application.
Feel free to contact us.
Unfortunately, we cannot answer any telephone inquiries.
If you have any questions, please contact us through the website and we will reply to your inquiry by e-mail.
Thank you for your understanding.