1-3 High Clean Poly Bag in Standard Sizes

ASO High Clean Poly Bag

"ASO High Clean Poly Bag" solves customer problems with clean bags such as: "It is difficult to obtain a sufficient number of clean bags for our large number of production lots", "It takes a long delivery time to get bags about 1 month.", and "We want inner packaging in an easy-to-use small pack size".

Major features

Clean

Highly clean

Standard size

Sterilized

Antistatic

UV protection

Overview

"ASO High Clean Poly Bag" solves customer problems with clean bags such as: "It is difficult to obtain a sufficient number of clean bags for our large number of production lots", "The bags have a long delivery time about 1 month", and "We want inner packaging in an easy-to-use small pack size".

Features

◇ This product uses "additive-free low density polyethylene" as the raw material and is produced in an ISO class 6 (class 1000) cleanroom.

◇ The bags are a "highly clean type" that the number of particles on the inner surface of the bag is controlled. This product has been certified to comply with various standards and is ideal for various applications including pharmaceuticals, medical devices, electronic parts, and semiconductors.

◇ We can deliver this product by the case. One case contains 30 to 500 bags, which are vacuum sealed in small units of 10 to 100 bags to make them easier to use.

◇ This product is available in 16 standard sizes and two thicknesses (0.05 mm and 0.1 mm). The size of the bags can be requested to suit the intended application. We have this product in stock and it is available for immediate delivery.
* Standard sizes are listed below.

◇ Upon your request, we can also deliver this product in gamma sterilized form by the case. The delivery time is about 14 days from the order date.

Standard compliance

Test items
Raw material	Food sanitation Act (Japan)	Standards and criteria for food and food additives, etc.
Raw material	Food sanitation Act (Japan)			Ministerial Ordinance on Milk and Milk products Concerning Compositional Standards, etc.
Product	Japanese Pharmacopoeia	Polyethylene or poypropylene containers for aqueous injections.
		USP	(661.1)Plastic Material of Construction
				(661.2)Plastic Packaging Systems for Pharmaceutical Use
				(87)Biological Reactivity Tests, In Vitro
		21CFR (FDA)	§177.1520 (C）2.2
		EP	(3.1.4)Polyethylene without additives for containers for parenteral preparations and for ophthalmic preparations.

※Some of the above test contents are excerpted and tested.

Inner surface cleanliness data

ASO High Clean Poly Bag［Size 3］

(0.05mm×260mm×380mm)

Particle size			2μm	3μm	5μm	10μm	25μm	40μm
Blank water	Measured value	0	0	0	0	0	0
				0	0	0	0	0	0
				0	0	0	0	0	0
		Maximum	0	0	0	0	0	0
		Average	0	0	0	0	0	0
		Minimum	0	0	0	0	0	0
Product	Measured value	26	20	2	0	0	0
				44	34	9	0	0	0
				37	23	3	0	0	0
		Maximum	44	33	9	0	0	0
		Average	36	26	5	0	0	0
		Minimum	26	20	2	0	0	0

ASO High Clean Poly Bag ［ Size 3A］
(0.1mm×250mm×300mm)

Particle size			2μm	3μm	5μm	10μm	25μm	40μm
Blank water	Measured value	0	0	0	0	0	0
				0	0	0	0	0	0
				0	0	0	0	0	0
		Maximum	0	0	0	0	0	0
		Average	0	0	0	0	0	0
		Minimum	0	0	0	0	0	0
product	Measured value	39	18	0	0	0	0
				51	26	1	0	0	0
				42	21	0	0	0	0
		Maximum	51	26	1	0	0	0
		Average	44	22	0	0	0	0
		Minimum	39	18	0	0	0	0

* The tables show measured, not guaranteed, values.
[Measurement method]
The bags were filled with 500 mL of dust-free water with a blank count close to zero and then the bag was tied at the top. Then, 10 mL of the water was taken out of the bag and the number of particles in this sample was counted. This measurement was repeated three times and the average value calculated. The total particle numbers are shown in the tables above.
* Measuring device: Particle counter from RION

Film properties

Measurement item			0.05mm	0.1mm	Measurement method
Tensile strength [N/mm²]	MD	28.9	28.0	JIS Z-1702
Tensile strength [N/mm²]		TD	18.9	JIS Z-1702	22.9
Tensile elongation [%]	MD	233	271	JIS Z-1702
Tensile elongation [%]		TD	629	JIS Z-1702	642
Tear strength [N/mm]	MD	99.0	29.4	JIS K-7128
Tear strength [N/mm]		TD	56.2	JIS K-7128	37.9
Seal strength [N/10mm]			9.1	19.5	Our measurement method
Oxygen permeability [ml/m² · 24h · MPa]			38996	19701	JIS K-7126
Water vapor permeability [g/m² · 24h]			9.23	4.72	JIS Z-0208

※The above table shows measured, not guaranteed,values.

Data for ion and metal impurities

This product uses a raw material with minimal contamination by "ions" and "metal impurities", which are unfavorable for semiconductor and electronic devices.

Metal type	0.05mm	0.1mm
Li	< 0.0004	< 0.0004
Na	0.0025	0.0053
Al	0.008	0.014
K	< 0.0004	< 0.0004
Ca	0.29	0.017
Cr	0.0006	0.0004
Fe	0.0022	0.0019
Ni	0.0017	0.0005
Cu	< 0.0004	0.0018
Zn	0.0022	0.0027

(In:ng/cm²)

※The above table shows measured,not guaranteed,values.

Size/Specifications

Size No.	Size (mm) [Width×Length]	Thickness (mm)	Quantity (No. of bags per packaging bag × No. of bundles)	Minimum quantity
Size 1	150×250	0.05	500 bags per case (100 bags x 5 bundles)	1case
Size2	200×300	0.05	500 bags per case (100 bags x 5 bundles)	1case
Size3	260×380	0.05	500 bags per case (100 bags x 5 bundles)	1case
Size4	300×450	0..05	500 bags per case (100 bags x 5 bundles)	1case
Size5	360×500	0.05	200 bags per case (50 bags x 4 bundles)	1case
Size6	400×550	0.05	200 bags per case (50 bags x 4 bundles)	1case
Size7	460×600	0.05	200 bags per case (50 bags x 4 bundles)	1case
Size8	550×900	0.1	80 bags per case (20 bags x 4 bundles)	1case
Size9	680×1150	0.1	50 bags per case (10 bags x 5 bundles)	1case
Size10	800×1400	0.1	40 bags per case (10 bags x 4 bundles)	1case
Size11	1000×1800	0.1	30 bags per case (10 bags x 3 bundles)	1case

Size No.	Size (mm) [Width×Length]	Thickness (mm)	Quantity (No. of bags per packaging bag × No. of bundles)	Minimum quantity
Size 1A	150×250	0.1	250 bags per case (50 bags x 5 bundles)	1case
Size2A	200×250	0.1	250 bags per case (50 bags x 5 bundles)	1case
Size3A	250×300	0.1	250 bags per case (50 bags x 5 bundles)	1case
Size5A	350×400	0.1	100 bags per case (25 bags x 4 bundles)	1case
Size7A	450×600	0.1	100 bags per case (25 bags x 4 bundles)	1case

This product is also available in custom sizes.

We produce this product to suit your application.
Feel free to contact us.

Go to the top of "Look for a product"